发布时间：2020-09-12 人气： 来源：
With the wide application of stainless steel, stainless steel screen has become a popular indoor and outdoor decoration product in recent years, mainly customized. So, what are the processing technologies of stainless steel screen? How is stainless steel screen installed? Let's make it up to you!
[Stainless steel screen has two kinds of processing and welding forming process]
1.Spot welding. There are seams, which are welded directly by means of points. This kind of processing usually uses this form of processing at a relatively long distance. If the polishing is too difficult, the polishing tool cannot be deeply polished and polished, so that the human eye can directly see the solder joint or use the spot welding process.
2.Full welding. Also called seamless welding. After polishing and polishing, no gaps can be found in the welded place. Suitable for applications in close proximity.
1.The laser cuts the screen and cuts the hollow through a large laser cutting machine to obtain a certain pattern. After the surface treatment, the vacuum plating is colored.
2.Welding and polishing the screen, using tube or plate processing, after surface treatment. Then welding polishing, vacuum plating coloring.
Rose gold stainless steel screen, titanium (black titanium) stainless steel screen, brown stainless steel grid, bronze stainless steel screen, green bronze stainless steel screen and other color stainless steel screen, etc., can also provide customers with swatches.
1. Electroplated titanium stainless steel screen; 2. Water-plated copper stainless steel screen; 3. Fluorocarbon paint stainless steel screen; 4. Painted stainless steel screen, etc.; 5. Color oil imitation copper stainless steel scree.
Stainless steel screen installation points:
1. Fixed point positioning: Firstly, measure the position of the screen installation and find the corresponding hole position on the ceiling (the fixed end tentacles on one end of the screen). Drill through the drill bit and cut the screen tentacles to a length of 1.5 cm.
2. The screen is in place: two people (the screen is very heavy, need two people to cooperate) to insert the screen tentacles obliquely into the punched hole position, so that the screen is fixed at the top and then the bottom end is corrected. Also check if the screen is biased.
3. Glue fixation: screen and the ground and the wall with a transparent glass glue to fix the glue, the glue is all in one go, should not be intermittent, otherwise the glue at the docking affects the beauty.
Welcome to call and WeChat !
周一 到 周日